YR Alu Conversion Kit Ultimate and Front Suspension Arm Set

The following 2 items are the lastest products developed by Yeah Racing! Take a look at the description in details!

 

*Yeah Racing Aluminum Conversion Kit Ultimate Version Blue For Tamiya TT-01/ TT-01E (FREE SHIP) #CK-TT01/EV2

 

Click to know more!!!

 

Tamiya TT01 Hop Up Parts in RC Racer

Yeah Racing has manufactured the blue alloy hop up parts for Tamiya TT-01 chassis! RC Racer (Popular UK RC magazine), RC World (Popular Japan RC magazine) , RC Model (Popular Japan RC magazine) have written reviews on the kit!

"...The rotating mass of the standard kit drivetrain parts is quite high so it was interesting to compare with the conversion alloy parts. The alloy options were a tighter fit all roundand with less weight, there will besome improvement in efficiency as well as in addition to the ‘bling’ look!...All of the location points for axle pins and shafts are bushed and spacers make for a very close tolerance on the important areas. The C-clips retain them which is a big improvement over the standard self tapping pins which can pull out with repeated maintenance or repair." by RC Racer

 

Reviews from RC Racer - January 2013

Reviews from RC Racer - November 2012

 

Reviews from RC WORLD - November 2012

Reviews from RC MODEL - November 2012

 

Yeah Racing (#CK-TT01/E-BU) Conversion Kit (BU) Upgrade version for TT-01 / TT-01E is now on SALE! 50% off only! Limited time offer!

Tamiya RC Car New Releases

Tamiya has just released several RC Cars & Parts!

 

Tamiya Mitsubishi Lancer Evolution VII (TT-01 TYPE-E）
Item No：58542

Length=446mm

【 Born to Race 】Originally on sale from February 2001, the Mitsubishi Lancer Evolution VII boasted a 280hp 2-liter turbocharged engine and featured high-spec modifications such as an active differential and electronically-controlled 4WD system. This 1/10 scale R/C assembly kit realistically reproduces the car, which enjoyed popularity in both rally and gymkhana events. The polycarbonate body accurately depicts the form of the car, including bumper with large intercooler grille as well as air outlets. In addition, the model shows off a sharp rear wing, realistic white 5-spoke wheels, and radial tires with tread pattern.

【 Evolved Chassis 】The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.

 

 

Tamiya 1/10 R/C Nissan R390 GT1（TT-01 TYPE-E)
Item No：58544

Length=428mm

【Nissan's Head-Turning Le Mans 1997 Entry 】The Nissan R390 GT1 entered the 1997 Le Mans 24 Hours Race with every hope of taking the victory, a goal which was sadly put paid to by gearbox problems in the race. The car's impressive specs included a 600hp 3.5-liter twin turbo engine, front and rear pushrod suspension, and a carbon composite-manufactured monococque. This 1/10 scale R/C assembly kit reproduces the R390's shape in a polycarbonate body featuring the car's characteristic small overhang, low and wide aerodynamic form. Number and sponsor stickers, window marking seals, and silver mesh wheels fitted with slick tires replicate the car's authentic appearance.

【Evolved Chassis 】The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.

 

Summary of New RC Cars & Parts Releases:

58542　Tamiya 1/10 R/C Mitsubishi Lancer Evolution VII (TT-01 Type-E)

58544　Tamiya 1/10 R/C Nissan R390 GT1 (TT-01 Type-E)

58552　Tamiya 1/10 R/C Asterion (XV-01T)

58553　Tamiya 1/10 R/C Fighter Buggy SV (DT-02)

54417　Tamiya Active Steering Assist Unit TGU-01

54425　Tamiya Steel Cup Joint (L/R) for TRF417 Gear Differential Unit II

54426　Tamiya 850 Bearing Adapters for RM-01 Front Uprights

54430　Tamiya Sponge Tape for Urethane Bumper (10pcs.)

54433　Tamiya TA06 Lightweight Main Shaft

54434　Tamiya TA06 Lightweight Front-Middle Shaft

54439　Tamiya TRF201 Suspension Weight Block (0°)

54440　Tamiya TRF201 Suspension Weight Block (5°)

54441　Tamiya DB02 Aluminum Rear Suspension Mount (Rear)

54455　Tamiya TA06 Carbon Reinforced N Parts (Rocker Arm)

54456　Tamiya RM-01 Front Skid Angle Spacer Set

51497　Tamiya 1/10 R/C Volkswagen Golf24 Body Parts Set

51514　Tamiya 1/10 R/C BMW M3 Sport Evo Jägermeister Body Parts Set

51517　1/10 R/C Subaru BRZ Body Parts Set

51500　Tamiya 1/10 R/C Subaru Impreza WRX STI Team Arai Body Parts

 

Find out more Tamiya RC Car Kits & Parts at rcMart!

RC Car Kits

RC Parts

Tamiya Car Kits, Bodies & Parts Stocked now!

Tamiya 1:10 TT01E Nissan R390 GT1 w/ESC EP #58544

Nissan created the R390 GT1 as a challenger to the 1997 24 Hours of Le Mans. The car featured a carbon composite monocoque and a 600hp 3.5-liter twin turbo V8 engine for superb performance. It recorded incredible lap times during pre-qualifying and went on to perform admirably during the race itself. The R390 assembly kit was originally released on the TA-03R 4WD touring car platform in 1997 and it's offered again on the easy to assemble TT-01 Type E chassis.

Item no.: 58544

 

Tamiya 1:10 TRF417 V5 Premium Package Chassis Kit EP #42240

Special features unique to the TRF417WX:

• Newly designed carbon fiber upper (2.0mm thick) and lower (2.25mm thick) decks feature refined shapes to provide optimum roll flexibility.


• Newly-designed one-piece aluminum servo mount is secured to the chassis by one side (inner side) only so as to not jeopardize chassis flexibility.


• Newly-designed aeration dampers help maximize traction.


• Front and rear carbon fiber damper stays (3.5mm thick) have redefined damper attachment positions.


• Front direct coupling is equipped with steel cup joints and coupled with Double-Cardan drive shafts to provide efficient, smooth power transfer.


• Rear gear differential features steel diff joints and swing shaft protectors.

Item no.: 42240

 

Tamiya 1:10 TT01E Mitsubishi Lancer Evo VII w/ESC EP #58542

Released in February 2001, the 7th-generation Mitsubishi Lancer Evolution featured a highly rigid body, a 280hp turbocharged 2-liter engine, and an electronically-controlled 4WD system with an active center differential. Its superb performance made it a popular choice for motorsports such as rally racing and gymkhana. In the USA, the car was introduced and immortalized to U.S. auto enthusiasts by the popular racing game known as Gran Tourismo. The Tamiya R/C version is modeled in 1/10 scale, features a polycarbonate hyper detailed body and it is mounted on the easy to assemble TT-01 Type-E 4wd chassis platform.

Item no.: 58542

 

Tamiya 1:10 Subaru BRZ Body Parts Set #51517

This is the spare body parts set of the Subaru BRZ. The body may be mounted on any Tamiya 190mm wide 4WD chassis platform.

Item no.: 51517

 

 

Tamiya 1:10 BMW M3 Sport Evo Jagermeister Body Parts Set #51514

This is the spare body parts set of the BMW M3 EVO. The body may be mounted on any Tamiya 190mm wide 4WD chassis platform.

Item no.: 51514

 

Tamiya Steel Bevel Gears For TA06 Gear Differential Unit #54428

Replace the kit-standard plastic gears (GV1 and GV2) with these metal gears to allow your car to handle tough driving conditions such as rally driving with a high-powered motor.

Item no.: 54428

 

Tamiya TA06 Lightweight Front-Middle Shaft #54434

Made from hard-coated aluminum, this lightweight, durable front middle shaft offers efficient power transfer and improved throttle response. It is compatible with a wide variety of pulleys to allow for creating drift settings on the TA-06 chassis.

Item no.: 54434

 

 

Tamiya TA06 Lightweight Main Shaft #54433

Made from durable aluminum, this lightweight main shaft offers efficient power transfer and improved throttle response on the TA-06 drivetrain. It also features hard coated surfaces for improved durability.

Item no.: 54433

 

Tamiya TA06 Carbon Reinforce N Parts (Rocker Arm) #54455

These carbon reinforced nylon N Parts (Rocker Arm) for the TA06 chassis platform offers increased front damper attachment rigidity for improved handling. The included reinforced pulley holder (N17) ensures a more efficient power transfer to the drive wheels.

Item no.: 54455

 

Tamiya Steering Assist Unit TGU-01 For F104, RM-01, M-06 #54417

This compact, lightweight unit is equipped with a gyro sensor system and when it detects the car beginning to slide, it quickly applies counter steering to prevent spins and maintain the car's stability. This is especially helpful when driving rear-wheel drive cars, such as the F104 and RM-01 chassis machines, or driving on slippery track surfaces. The counter steering range can be adjusted and sensitivity may also be adjusted by your transmitter when a 3-channel R/C system is used.

Note: Gyro systems are banned from use in organized competition in the United States from leading sanctioning organizations. It is also banned for use in the Tamiya Championship Series. The item is recommended for hobbyists who are not racing in such events.

Item no.:54417

Yeah Racing Conversion Kit for Tamiya TT01 Review by RC World (Japan)

The upgraded Yeah Raicng Conversion Kit for Tamiya TT01 has been reviewed by RC World (A popular Japan RC Magazine)!

This hop ups will upgrade the performance of Tamiya TT01, making it easier to handle and run smoother than before. Check them out here.

Item no.: ck-tt01

Yeah Racing Conversion Kit for Tamiya TT01 Review by RC Magazine (Japan)

The upgraded Yeah Raicng Conversion Kit for Tamiya TT01 has been reviewed by RC World (A popular Japan RC Magazine)!

This hop ups will upgrade the performance of Tamiya TT01, making it easier to handle and run smoother than before. Check them out here.

Item no.: ck-tt01

Review of Yeah Racing Conversion Kit for Tamiya TT01 by RC Racer

Blue is most definitely more bling when it comes to this upgraded TT-01. Witha full package of alloy from the guys at Yeah Racing, Racer treats the Tamiya chassis to one hell of a makeover

Tamiya TT-01E New Releases

Tamiya has just released TT01 E car kit with new body!

1. Volkswagen Golf24 (TT-01 Type-E)

★1/10 scale RC assembly kit of the Volkswagen Golf24 race car which was entered in the 2011 24 Hours Nürburgring to commemorate the 35th anniversary of the Golf GTI.

★The sporty form of the Golf24 race car has been accurately reproduced by the polycarbonate body. Separate parts for rear wing and side mirrors are included.

★The TT-01 Type-E chassis features a shaft-driven 4WD system to offer easy handling and great customizability.

※2-channel R/C system, battery pack, and charger sold separately.

Item No：58533　

 

2. Subaru BRZ R&D Sport (TT-01 Type-E)

★This is a 1/10 scale R/C assembly kit of the Subaru BRZ R& D Sport which was created to enter the GT300 class during the 2012 Super GT season.

★The race-spec form of the BRZ GT300 has been realistically reproduced by the polycarbonate body.

Item No：58543

 

3. Subaru BRZ (TT-01 Type-E)

★This is a 1/10 scale R/C assembly kit of the Subaru BRZ.

★The sporty form of the BRZ has been realistically reproduced by the polycarbonate body. Separately-molded polycarbonate light cases included.

Item No：58545　

 

4. XB Volkswagen Golf24 (TT-01 Type-E)

★This is a ready-to-run R/C model of the Volkswagen Golf24 race car which was entered in the 2011 24 Hours
Nürburgring to commemorate the 35th anniversary of the Golf GTI.

★The sporty form of the Golf24 race car has been realistically reproduced by the polycarbonate body.

Item No：57837

 

5. XB Subaru Impreza WRX STI Team Arai (TT-01 Type-E)

★This is a ready-to-run R/C model of the Subaru Impreza WRX STi rally car which was fielded by the Subaru Team Arai in 2011 and won Rd.5 Rally Hokkaido during the Asia-Pacific Rally Championship (APRC) that year.

★The sporty form of the Impreza has been realistically reproduced by the polycarbonate body.

Item No：57841

 

Click here for more Tamiya TT01 Car Kits~

Tamiya Cars & Parts Arrived! (TT01E, 1:10 etc)

1. Tamiya 1:10 TT-01E Opel Calibra V6 DTM w/ESC EP #84235

The RC model was originally released on the XV-01 platform and is available on the entry level 4WD TT-01 Type E chassis platform. A scale RC replica of the Opel Calibra V6 DTM.

Item no.: 84235

2. Tamiya 1:10 Fast Attack Vehicle - Shark Mouth w/EP #58539

This radio control kit is a variant of item 58496 RC Fast Attack 2011. This version includes a sticker set that is reminiscent of WWII era American warplanes. The included sticker set depicts a shark mouth and air force star markings. This fast attack vehicle features a realistic body and roll cage and offers superior off-road performance.

Item no.: 58539

3. Tamiya 1:10 TT-01E Subaru Impreza WRX STI - Team Arai w/ESC EP #58538

The RC model was originally released on the XV-01 platform and is available on the entry level 4WD TT-01 Type E chassis platform. It is a RC replica of the Subaru WRX STI Team Arai on Tamiya TT01.

Item no.: 58538

4. Tamiya RC Driver Figure For 4X4 Pick Up Bruiser #54416

The driver figure of the original Toyota Bruiser is available separately, which can be fitted into the 2012 release of the Toyota Bruiser.

Item no.: 54416

5. Tamiya RC Black Bumper Parts D For 4X4 Pick Up Bruiser #54415

The Toyota Bruiser (RN36) kit includes D Parts (bumpers) that are molded in white. To help R/C kit builders with building customizing options, these new parts are molded in black.

Item no.: 54415

6. Tamiya 1:10 Silvia S13 Body Parts Set #51496

 

This is a spare body parts set of the Nissan Silvia (S13). It is designed to fit the M0-6 chassis that is built to the 239mm wheelbase.

Item no.: 51496

7. Tamiya TA06 Chassis Ballast Weight #54401

This is a metal ballast weight for the TA06 chassis fits inside the battery compartment.

Item no.: 54401

8. Tamiya D Parts For 58242 Wild Willy 2 #10005746

Item no.: 10005746

How to Convert Your RC Car Into Drift Spec (Beginner's Guide)

RC Drifting is taking off in a big way, in this article it will show you how to convert the 1/10 touring car into a drifters dream machine. It's very simple and generally only takes a couple of hours, using this practical guide I'll have you sideways before you know it.

Review of Yeah Racing Aluminum Conversion Kit for Tamiya TT01/E (Upgrade Version)

Review for Yeah Racing Aluminum Conversion Kit for Tamiya TT01/E (Upgrade Version)

Great news for all Tamiya TT01/E owners! Yeah Racing has launched a full Aluminum conversion kit in RC market. This conversion kit includes all necessary hop up parts to upgrade TT01/E. Check out the video for details.

Manufacturer: Yeah Racing

Item no. : CK-TT01

Drift your car with Tamiya TT-01/ TT-01E

Tamiya TT-01/ TT-01E have been famous entry RC cars. Most beginners have started racing RC car with a Tamiya TT-01/ TT-01E, from there some have gone far to race different RC cars, leaving it on the top shelves. In fact, there are different ways to play with TT-01/ TT-01E, drifting is one of them. Why not getting back to it again and convert it into a drift car?



There are a few things to note before converting it:

Basic idea of drift setups:

The setups should aid in inducing and maintaining controlled oversteer. The essential modifications for drifting are the Diff and suspension. A locking diff is needed in lengthening the drift duration. For set up in suspension, it should be stiffer on the rear to help break traction, and softer on the front to help aid traction. In other words, the rear should be as vertical as possible, while the front should be as angled as possible.

Detailed setups:

1. Fully ball raced. The rolling friction will be reduced effectively, allowing for fast speed and smooth run.


2. Restrict the movement of the rear diff, as it will break traction easily in the rear end of the car. It will also become steadier in drifting.


3. Pay attention to the weight distribution. More weight should be put in the front, this way the car will have more control in the front and help pull the car through the drift. Furthermore, the weight in the chassis should be centered. Otherwise, it will tend to drift in one direction.


4. Adjust the toe in, toe out and camber degree:
   
   
   
   • In the front and rear tyres, set the camber degree to ~2-3 degree. This will offer more control in corners and allow breaking traction easily.
   
   
   • Adjust a Toe in of ~2-3 degrees at the rear for better turning.
   
   
   • Set a Toe out of ~2-3 degrees at the front for sharper turns.
   
   
   
   


5. Replace the tyres to low traction one. The 2 major types are resin or rubber/resin compound. Resin tyres break traction easily,whereas the compound tyres offer more grip.

What Hop Ups are recommended to aid drifting on a budget?

1. Yeah Racing Aluminium Main Center Shaft (# TT-014V2)

2. Rear diff lock/spool (#TT-133BU)

What Hop Ups are recommended to further improve the basic chassis?

1. Yeah Racing Steel/Alum Universal Shaft BU For Tamiya TT01/ TT01E (# TT-015V2BU)

• This universal shaft will reduce the rolling friction, which means it will run faster and gain more stability as it goes.

2. Yeah Racing Aluminum Bearing Steering Set BU For Tamiya TT01E (#TT01E-042BU)

• Effectively reduce the 'slop' from the standard plastic version

3. Yeah Racing Aluminum Rear Hub/Knuckle Arm 2 Degree BU For Tamiya TT01 (# TT-007V2BU)

• For maintaining a 2 or 3 degree rear toe in.

4. 3Racing TT01-E33 Graphite Shock Tower Mount For TT-01E

• Provides more mounting options for shocks

5.Tamiya (#53666) Metal Motor Mount For TT01/DF02

6.Yeah Racing Aluminum Solid Axle BU for Tamiya TT01 Series (#TT-069BU)

 

Full Conversion Kit is also available in RCMart.com:

Blue Version: Yeah Racing (#CK-TT01/E-BU) Conversion Kit (BU) Upgrade version for Tamiya TT-01 / TT-01E

Red Version: Yeah Racing (#CK-TT01/E-RD) Conversion Kit (RD) Upgrade version for Tamiya TT-01 / TT-01E

Video : Aluminum Conversion Kit/ Hopup parts for TT-01 & TT-01D

Here is a very nice video clip presented by RC ADVENTURES.  They got a project for building a brushless touring drift car by using a TAMIYA TT01 R car kit.   RC Adventure selected Yeah Racing conversion kit for TT-1/  TT01R/ TT01E aluminium hop up parts for this project.  

 

 

 

Alloy Hop Ups Manufacuter:
http://www.yeahracing.com

Where to buy the Conversion Kit:
http://www.rcmart.com/hopup-parts-c-595.html
 

 

Tamiya TT-01 / TT-01E Conversion Kit (BU) Upgrade version by Yeah Racing

Tamiya TT-01 / TT-01E Conversion Kit (BU) Upgraded version by Yeah Racing has arrived at rcMart.com.

This upgraded conversion kit will improve the balance and speed of the TT-01. It is accomplished by shifting the center of balance, minimizing the steering, balancing the throttle and brake in a corner...Try upgrading the following and you will find the difference!

2 color: Red/ Blue available, 25 items included, with detailed instruction manuals.

Some of the Highlights included:

Aluminum Center Drive Shaft
The original plastic driveshaft is VERY flexible and doesn’t do a good job putting power to the ground, upgrading to an aluminum piece provides you with more predictable acceleration, as well as allowing you to upgrade to lower Turn motors.

Aluminum Lower Arms
Many Tamiya TT-01 owners say these are purely for "bling". However if you are very hard on your car, or you run into a lot of stuff while learning, you can break the stock arms, causing down time and headaches. Replace the cheap plastic parts with an aluminum parts can save a lot of troubles.

Aluminum Steering
The aluminum steering is stronger and allows much less slop than the plastic stock pieces.

Adjustable Upper Arm Set
The adjustable upper arms are a must, for you to adjust the camber angle and take advantage of the tires. 

Click here to find out more:

Blue Version: http://www.rcmart.com/yeah-racing-cktt01ebu-conversion-upgrade-version-tamiya-p-28691.html?utm_source=RSS&utm_medium=New_Product&utm_campaign=0510_YR_TT01

Red Version: http://www.rcmart.com/yeah-racing-cktt01erd-conversion-upgrade-version-tamiya-p-28801.html?utm_source=RSS&utm_medium=New_Product&utm_campaign=0510_YR_TT01

Tamiya TT-01 / TT-01E Conversion Kit (BU) Upgraded version by Yeah Racing Arrived!

Tamiya TT-01 / TT-01E Conversion Kit (BU) Upgrade version by Yeah Racing has arrived at rcMart.com.

This upgraded conversion kit will improve the balance and speed of the TT-01. It is accomplished by shifting the center of balance, minimizing the steering, balancing the throttle and brake in a corner...Try upgrading the following and you will find the difference!

2 color: Red/ Blue available, 25 items included, with detailed instruction manuals.

Some of the Highlights included:

Aluminum Center Drive Shaft
The original plastic driveshaft is VERY flexible and doesn’t do a good job putting power to the ground, upgrading to an aluminum piece provides you with more predictable acceleration, as well as allowing you to upgrade to lower Turn motors.

Aluminum Lower Arms
Many Tamiya TT-01 owners say these are purely for "bling". However if you are very hard on your car, or you run into a lot of stuff while learning, you can break the stock arms, causing down time and headaches. Replace the cheap plastic parts with an aluminum parts can save a lot of troubles.

Aluminum Steering
The aluminum steering is stronger and allows much less slop than the plastic stock pieces.

Adjustable Upper Arm Set
The adjustable upper arms are a must, for you to adjust the camber angle and take advantage of the tires.

Click here to find out more:

Blue Version: http://www.rcmart.com/yeah-racing-cktt01ebu-conversion-upgrade-version-tamiya-p-28691.html?utm_source=RSS&utm_medium=New_Product&utm_campaign=0510_YR_TT01

Red Version: http://www.rcmart.com/yeah-racing-cktt01erd-conversion-upgrade-version-tamiya-p-28801.html?utm_source=RSS&utm_medium=New_Product&utm_campaign=0510_YR_TT01

3Racing New Parts for FGX & Restocked!!

Two New Parts for Sakura FGX!!

Please CLICK the links below for more information:
3Racing (#FGX-329) 8MM POM Ball Set For 3racing Sakura FGX
3Racing (#FGX-322/PK) Aluminium Steering System For 3racing Sakura FGX

& More Parts Restocked!!
3Racing