We just released another set of 3Racing Sakura XI Sports Conversion Parts Kit! We also got 3Racing Conversion Parts Kits for Sakura D3 and Zero
Showing posts with label Chassis. Show all posts
Showing posts with label Chassis. Show all posts
Wednesday, November 27, 2013
Friday, September 13, 2013
MST FXX VIP FRONT MOTOR 2WD RWD FR RC Drift Chassis Kit #130906 (FREE SHIP) PRE-ORDER NOW!!
Limited Free Shipping and US$30 off till 25/9. Order before it is all gone~!!!!
Here it is, the new RWD FXX VIP chassis from MST! After much testing and innovation, you are now able to pre-order your VIP chassis and be amongst the first in the world to have yours delivered! We will be shipping early October, on a first come, first served basis so it's well worth getting your order in ASAP!
Please note, photos show prototype red aluminium version which may change in final production spec. We will update this page with new photos and full specs as soon as possible and as some of you may already knew, we are currently adding hundred of drift items into our catalog. Stay tuned with rcMart and go Sideway with us~!!
Features~
- Silver Carbon Chassis
- Red or Silver aluminium parts
- 2WD drive system
- Front KPI alum. knuckle
- MST Gyroscope
- Steering angle max is 75
- Ackerman 1 degree
Click HERE to Pre-order the Drift Beast
Wednesday, May 8, 2013
Yeah Racing Chassis Downstops & Height Measuring Kit for 1:8 / 1:10 On Road #YT-0071BU
Yeah Racing has developed a new set up tool- Yeah Racing Chassis Downstops & Height measuring kit for 1:8 / 1:10 On Road.
This set up system is used to measure the height of the chassis and measure the downstops.
- To measure the height of the chassis
- To measure the Downstops
Step 1: Place the flat part of the chassis on the 15mm Droop Gauge Support Blocks.
Step 2: Use the droop gauge support blocks to escalate the chassis. Then measure the downstop value with the droop gauge. The values shown on the droop gauge indicates how many millimeters the suspension drops below the level of the chassis.
*Photo for reference only.
Item no.: YT-0071BU
Monday, December 17, 2012
Xray T1, T2, T3, T4 Parts Stocked!
Xray Front Suspension Arm (One Hole) - Graphite for T2 T3 T4 #XR-302167
Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.
The optimized suspension arm gives improved traction, easier handling, and decreases tire overheating which leads to car stoppage under high-grip conditions. Features a single optimized shock mounting position and integrated anti-roll bar mounts. The graphite arm has same size and geometry as standard 1-hole suspension arm.
Item no.:XR-302167
Xray Graphite Chassis 2.2mm #XR-301134
The new 2.2mm thick chassis is CNC-machined from premium-grade graphite material and provides maximum traction under low traction conditions while maintaining stability and forgiveness under high traction conditions. Specifically designed for LiPo batteries, all electronics are located along the centerline to make this the best-balanced electric touring car.
The high-grade, custom-manufactured carbon graphite is specially produced based on XRAY’s own recipe and specifications.
Item no.:XR-301134
Xray Graphite Shock Tower Rear 3.0mm for T4 #XR-303086
CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Lowered by 15mm to help move the CG as low as possible, the shock towers are smaller, lighter, more compact and, after vigorous testing, have been race-tuned.
Item no.: XR-303086
Xray Composite Ball Joint 5mm Short Open for T2 T3 T4 #XR-303454
Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear).
Item no.:XR-303454
Xray Composite Anti-Roll Bar Holders for T2 T3 T4 #XR-303411
Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.
Item no.:XR-303411
Xray Composite Upright 0 degree Outboard Toe-In - Medium - Rubber Spec for T2 T3 T4 #XR-303352
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Features two roll center positions on the top of the rear upright. Accommodates small but robust 5x10 ball-bearings for minimized unsprung weight.
Medium rigidity (labeled "M") specially optimized for rubber-tire racing.
Use on both left and right sides of the car. Can be also used for foam tires.
Item no.:XR-303352
Xray Composite Rear Suspension Arm (One Hole) - Graphite for T2 T3 T4 #XR-303167
Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.
The optimized suspension arm gives improved traction, easier handling, and decreases tire overheating which leads to car stoppage under high-grip conditions. Features a single optimized shock mounting position and integrated anti-roll bar mounts.
The graphite arm has same size and geometry as standard 1-hole suspension arm.
Item no.:XR-303167
Xray Composite C-Hub Right 4 degree - Hard - Foam Spec for T2 T3 T4
#XR-302373
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.
New C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly, and the large openings prevent binding of the CVD in serious crashes.
The C-hubs are available in all standard caster angles (2°, 4° and 6°) and are also available in two different rigidities that are optimized for particular racing conditions. The EU Edition includes medium rigidity (M) C-hubs specially optimized for rubber-tire racing, while the US Edition includes hard rigidity (H) C-hubs specially optimized for foam-tire racing.
Item no.: XR-302373
Xray Composite Dual Servo Saver Arm for T3 T4 #XR-302526
This is a molded arms for dual servo saver, made form tough composite material. Suitable for left and right arms.
Item no.: XR-302526
Xray Ball-Bearing Composite Bushing for T2 T3 T4 #XR-302295
Item no.:XR-302295
Xray Composite Steering Block - Hard - V2 for T2 T3 T4 #XR-302253
Molded composite steering block of “hard” hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 and T4 cars.
Item no.: XR-302253
Xray Composite Shock Ball Joint - Open for T2 T3 T4 #XR-308316
Item no.:XR-308316
Xray Composite Spur Gear 114T / 64P for T1 T2 T3 T4 #XR-305884
XRAY precision molded spur gear. This spur gear has been strategically lightened to reduce rotating mass.
Item no.: XR-305884
Xray Composite Spur Gear 112T / 64P for T1 T2 T3 #XR-305882
Item no.: XR-305882
Xray Composite Spur Gear 84T / 48P - Hard for T1 T2 T3 T4 #XR-305784
Item no.:XR-305784
Xray Composite Offset Spur Gear 108T / 64P for T1 T2 T3 #XR-305878
Item no.: XR-305878
Xray Composite Offset Spur Gear 110T / 64P for T1 T2 T3 #XR-305880
Item no.: XR-305880
Xray Composite Offset Spur Gear 104T / 64P for T1 T2 T3 #XR-305874
Item no.: XR-305874
Xray Anti-Roll Bar Rear 1.2mm for T4 #XR-303492
Item no.:XR-303492
Xray Anti-Roll Bar Front 1.6mm for T4 #XR-302496
Item no.:XR-302496
Xray Anti-Roll Bar Front 1.2mm for T4 #XR-302492
This is a replacement XRAY 1.2mm Front Anti-Roll Bar, and is intended for use with the XRAY T4 1/10 scale electric touring car. This is the stock front anti-roll bar.
Item no.:XR-302492
Xray Anti-Roll Bar Front 1.4mm for T4 #XR-302494
Item no.: XR-302494
Xray Anti-Roll Bar Front 1.5mm for T4 #XR-302495
Item no.: XR-302495
Xray Ball Universal 5.8mm Hex #XR-303241
Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four.
Item no.:XR-303241
Xray 007 Ball End 5mm with Thread for T2 T3 T4 #XR-302652
Item no.:XR-302652
Xray 4S Spring Set C =2.5 for T4 #XR-308275
Item no.: XR-308275
Xray 4S Spring Set Progressive C = 2.5-2.8 for T4 #XR-308264
Item no.: XR-308264
Xray 4S Spring Set C =2.3 for T4 #XR-308274
Item no.: XR-308274
Friday, September 21, 2012
Pro-Line New Releases
PRO-2 LCG Performance Chassis
This is Pro-2 Performance Chassis Conversion Kit for the Slash® 2WD.
Pro-Line is proud to release the Pro-2 Performance chassis, which has been specifically designed to bring your Slash® up to racing specifications. Every feature you would expect to find in a high-end race chassis is now available for Traxxas Slash® 2WD. This new Pro-2 Performance Chassis also goes along great with Pro-Line’s Performance Transmission!
Features:
- Super Tough 7075 Aluminum Chassis
- Completely Adjustable Weight Bias
- Durable Aluminum Servo Mounts and Steering Posts
- Jet Fighter Inspired Side Pods and Bumpers
Chevy Silverado HD Clear Body
This is a Chevy® Silverado™ HD Clear Body for the Slash 2WD and Slash 4x4. It is time to man up and go HD with Pro-Line’s new Chevy® Silverado™ HD scale truck body! Pro-Line now gives you the option to convert your Slash® Short Course Truck into a True-Scale Lifted Truck. This scale truck body is perfect for giving your Truck a completely different look!
*Note: This body requires extended body mounts for proper body fit*
BullDog Clear Body
This is a BullDog Clear Body for the Stampede® 2wd and Stampede® 4x4. Are you looking to add increased performance and race styling to your Stampede®? Look no further than Pro-Line’s new BullDog body specifically designed for your Stampede®! While testing the new Pro-Line Transmission in our high-speed Stampede®, we grew frustrated that the stock body kept catching air at full throttle and causing scary high-speed wheelies and crashes. The aerodynamics of the BullDog have been designed for amazing high speed stability and front down force so you can reach higher speeds than ever before.
This is a BullDog Clear Body for the Electric Rustler®.
ION MC (Clay) Tires for SC / Off-Road 1:8 Buggy
This is a pair of ION Tires for SC 2.2”/3.0” Race Tires / 1:8 Buggy Race Tires.
The ION proved electrifying from the start, taking the ROAR National Championship in Pro-2 SC at the hands of Ryan Cavalieri! The ION was designed from the ground-up to be the ultimate indoor clay tire requiring zero break-in period and ground breaking performance. The unique molecular structure tread design provides unbelievable forward and side traction not yet achieved in any indoor race tire to date. Even with the super-low tread height, maximum wear is reached by the alternating dual center lugs. The ION is also extremely easy to drive due to the super-smooth side tread that flows organically out of the tire sidewall.
Subscribe to:
Posts (Atom)
Special Offers
