rcMart Blogger: Xray T1, T2, T3, T4 Parts Stocked!

Xray Front Suspension Arm (One Hole) - Graphite for T2 T3 T4 #XR-302167

Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.

The optimized suspension arm gives improved traction, easier handling, and decreases tire overheating which leads to car stoppage under high-grip conditions. Features a single optimized shock mounting position and integrated anti-roll bar mounts. The graphite arm has same size and geometry as standard 1-hole suspension arm.

Item no.:XR-302167

Xray Graphite Chassis 2.2mm #XR-301134

The new 2.2mm thick chassis is CNC-machined from premium-grade graphite material and provides maximum traction under low traction conditions while maintaining stability and forgiveness under high traction conditions. Specifically designed for LiPo batteries, all electronics are located along the centerline to make this the best-balanced electric touring car.

The high-grade, custom-manufactured carbon graphite is specially produced based on XRAY’s own recipe and specifications.

Item no.:XR-301134

Xray Graphite Shock Tower Rear 3.0mm for T4 #XR-303086

CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Lowered by 15mm to help move the CG as low as possible, the shock towers are smaller, lighter, more compact and, after vigorous testing, have been race-tuned.

Item no.: XR-303086

Xray Composite Ball Joint 5mm Short Open for T2 T3 T4 #XR-303454

Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear).

Item no.:XR-303454

Xray Composite Anti-Roll Bar Holders for T2 T3 T4 #XR-303411

Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.

Item no.:XR-303411

Xray Composite Upright 0 degree Outboard Toe-In - Medium - Rubber Spec for T2 T3 T4 #XR-303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Features two roll center positions on the top of the rear upright. Accommodates small but robust 5x10 ball-bearings for minimized unsprung weight.

Medium rigidity (labeled "M") specially optimized for rubber-tire racing.

Use on both left and right sides of the car. Can be also used for foam tires.

Item no.:XR-303352

Xray Composite Rear Suspension Arm (One Hole) - Graphite for T2 T3 T4 #XR-303167

Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.

The graphite arm has same size and geometry as standard 1-hole suspension arm.

Item no.:XR-303167

Xray Composite C-Hub Right 4 degree - Hard - Foam Spec for T2 T3 T4

#XR-302373

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.

New C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly, and the large openings prevent binding of the CVD in serious crashes.

The C-hubs are available in all standard caster angles (2°, 4° and 6°) and are also available in two different rigidities that are optimized for particular racing conditions. The EU Edition includes medium rigidity (M) C-hubs specially optimized for rubber-tire racing, while the US Edition includes hard rigidity (H) C-hubs specially optimized for foam-tire racing.

Item no.: XR-302373

Xray Composite Dual Servo Saver Arm for T3 T4 #XR-302526

This is a molded arms for dual servo saver, made form tough composite material. Suitable for left and right arms.

Item no.: XR-302526

Xray Ball-Bearing Composite Bushing for T2 T3 T4 #XR-302295

Item no.:XR-302295

Xray Composite Steering Block - Hard - V2 for T2 T3 T4 #XR-302253

Molded composite steering block of “hard” hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 and T4 cars.

Item no.: XR-302253

Xray Composite Shock Ball Joint - Open for T2 T3 T4 #XR-308316

Item no.:XR-308316

Xray Composite Spur Gear 114T / 64P for T1 T2 T3 T4 #XR-305884

XRAY precision molded spur gear. This spur gear has been strategically lightened to reduce rotating mass.

Item no.: XR-305884

Xray Composite Spur Gear 112T / 64P for T1 T2 T3 #XR-305882

Item no.: XR-305882

Xray Composite Spur Gear 84T / 48P - Hard for T1 T2 T3 T4 #XR-305784

Item no.:XR-305784

Xray Composite Offset Spur Gear 108T / 64P for T1 T2 T3 #XR-305878

Item no.: XR-305878

Xray Composite Offset Spur Gear 110T / 64P for T1 T2 T3 #XR-305880

Item no.: XR-305880

Xray Composite Offset Spur Gear 104T / 64P for T1 T2 T3 #XR-305874

Item no.: XR-305874

Xray Anti-Roll Bar Rear 1.2mm for T4 #XR-303492

Item no.:XR-303492

Xray Anti-Roll Bar Front 1.6mm for T4 #XR-302496

Item no.:XR-302496

Xray Anti-Roll Bar Front 1.2mm for T4 #XR-302492

This is a replacement XRAY 1.2mm Front Anti-Roll Bar, and is intended for use with the XRAY T4 1/10 scale electric touring car. This is the stock front anti-roll bar.

Item no.:XR-302492