The largest R/C model hobby shop in asia. More than 20,000 SKU radio control model products in stock; from car kit to parts, engine, motor, wheel, tire, tool, bearing, radios, servo, ESC, li-po battery, heat sink, airplane, helicopter.... We carry Tamiya, Kyosho, HPI, Traxxas, Axial, Xpress, Speed Passion, Yeah Racing, Hot bodies, Spektrum, KO, Futaba, Sanwa, GWS.... and much more!
Thursday, September 18, 2014
Tuesday, December 31, 2013
Yokomo Light Bracket and Rear Wing Accessories
We have just stocked some Yokomo Light Bracket and Rear Wing Accessories. Please see the items below:
Yokomo Light Bracket For HKS Racing Performer 86 Body #SD-HK86L
This is a light unit plastic parts to be attached to the body 86 HKS Racing Performer of the drift package series. Aluminum mesh tape and double-sided tape for mounting is also included. It is possible to mount active LED light unit set sold separately.
Click here for more!
Monday, December 30, 2013
Friday, December 27, 2013
Monday, June 3, 2013
Yokomo Parts Stocked!
Yokomo 11.3mm Hex Rod End Balls S Size ZC-206SH
Rod end ball to be used in such as upper arm mounting portion. Hexagonal hole so attached to the tip of the ball, it is possible to turn an Allen wrench size 2mm. Please use the box wrench 5mm when turning the nut.
Item no.: ZC-206SH
Yokomo Front Steering Hub Carrier Caster 4 Degree for BD7 BD5 B7-413W
These are Yokomo Front Steering Hub Carrier (Caster 4 Degree) for BD7 / BD5.
These are BD7 standard front steering hub carrier. Also can be used for BD5, a double universal joint shaft is used, it has been designed to avoid interference with the joint. Caster angle is 4 degrees.
Item no.: B7-413W
Yokomo Rear Wing Slide Window Set For HKS Racing Performer Toyota 86 SD-HK86W
This is the HKS Racing Performer 86 Accessories Parts Set drift package series, the D1 version.
Item no.: SD-HK86W
Yokomo RC Pit Mat 600x900mm YT-YPM
That lay on the table at the time of the pit stop, is a pit mat to prevent rolling of small parts, can be prevented as well as dirt. A synthetic leather to be worthy of such agents grip and cleaner, and it is with the finish with the high-quality Yokomorogo of embroidery is given. 900 × 600mm size of pit general.
Item no.: YT-YPM
Yokomo BD7 High Traction Graphite Upper Deck B7-003H
Compared to the kit standard 2.0mm thick upper deck, this thinner version will help improve overall grip on low grip surfaces. However this upper deck can also be used to optimize chassis stiffness where speeds are regulated as in stock class racing, and even in high grip conditions.
Item no.: B7-003H
Wednesday, May 15, 2013
Yokomo RC Car Kits
Yokomo RC cars are a brand of radio controlled cars that are rapidly rising in the world of motorsports. Over the years, Yokomo has increased their product range, from RC Cars, Accessories, Kits, Bodies and more.
Yokomo is famous for world replicas of Touring Cars, and in house designs touring cars for racing. These models have won numerous prestigious championships over the years, especially the Japanese National Championships.
If you are looking for something that is more customized, you can get chassis, engines, body parts, electronics, fittings and wheels to suit your needs. This allows you to build a fantastically customized car that can move like the wind.
The advantage of buying Yokomo RC cars is the amount of upgrades that are possible on your model. These upgrades aren't just your usual set of visual changes, but also include a lot of performance-based enhancements as well.
Some of the most popular upgrades are electrical. You can get working headlights on your Yokomo RC cars as well as different light buckets, coloured LED lights for the wheel rims, which glow in the dark, as well as under-body lights.
If you are looking for something that is fantastic to drive and visually stimulating, then Yokomo RC cars are just the thing for you. Whether you make them yourself with parts or buy a complete kit, you will find little else that can match the radio controlled model experience provided to you by Yokomo RC cars.
Monday, February 25, 2013
Yokomo BD7 Parts Stocked!
Monday, December 17, 2012
Yokomo Body, Parts Stocked!
Yokomo Drift Body HKS Racing Performer 86 #SD-HK86BS
This is Yokomo Drift Body HKS Racing Performer 86. Input from combat to D1GP 2012 season, to keep the top rank of the drive while Nobuteru Taniguchi debut year, HKS Racing Performer 86. So easy to enjoy the charm of your drift, assembly kit was reproduced as electric radio control car 1/10 scale.
Item no.: SD-HK86BS
Yokomo Light Bracket For Team Toyo Tires Drift w/GP Sports #SD-TY180L
This is a light unit mounted on the 180SX body parts Pradesh Team TOYO TIRES DRIFT with GP SPORTS drift package series. Also comes with aluminum mesh tape and double-sided tape for mounting. Can be attached with (#D-065) to active LED light unit set (sold separately).
Item no.: SD-TY180L
Yokomo Light Bracket For DRoop AE86 #SD-DR86L
This is a light unit mounted on the plastic parts of the body DRoo-P AE86 drift package series. Also comes with aluminum mesh tape and double-sided tape for mounting. Can be attached and (#D-065) active LED light unit set (sold separately).
Item no.: SD-DR86L
Yokomo Front Graphite Steering Block For BD7/5 #BD-415SG
This is a lightweight graphite Front Steering Block for BD5. Using the mixed resin graphite harder than normal, increasing the sense of stability in the corners improve steering response and high speed, it is a valid item especially in high-grip road surface. Common parts left and right.
Item no.: BD-415SG
Tuesday, October 30, 2012
Yokomo BD7 Touring Car Kit w/B7-203 EP MRTC-BD7+
The enjoyment and excitement from driving a car with the ultimate in balance and cornering performance – this what all true drivers seek. Starting in Japan, data has been compiled from testing on circuits worldwide, and condensed into an all new machine that will provide the performance that world-class drivers demand. Optimum weight balance has been achieved by moving the motor further inward, and the integral chassis components are symmetrically designed to provide precise response to steering input, and provide exhilarating cornering. Three BD7 cars made the A-final at the 2012 IFMAR World Championships, showcasing the top level performance of this all new machine, and to add even more allure, the new BD7 is priced more competitively than ever before.
Manufacturer: Yokomo
Item no.: MRTC-BD7+
Thursday, October 11, 2012
Yokomo Drift Body Stocked! (Team BANDOH, Yuke's Team Orange Beast Eye, GRX130 Mark X)
Yokomo Drift Body Team BANDOH w/Nats Aristo #SD-BNABS
- For: 1:10 On Road
- Clear & Uncut Body
- Material: Lexan
- Clear protective film to prevent overspray: Yes
- Pre-drilled mounting holes: Yes
Item no.: SD-BNABS
Yokomo Drift Body Yuke's Team Orange Beast Eye C33 #SD-C33BS
- For: 1:10 On Road
- Clear & Uncut Body
- Material: Lexan
- Clear protective film to prevent overspray: Yes
- Pre-drilled mounting holes: Yes
Item no.: SD-C33BS
Yokomo Drift Body Good Year Racing GRX130 Mark X #SD-MKXBS
- For: 1:10 On Road
- Clear & Uncut Body
- Material: Lexan
- Clear protective film to prevent overspray: Yes
- Pre-drilled mounting holes: Yes
Item no.: SD-MKXBS
Tuesday, October 9, 2012
Yokomo BD5 , BD7 Parts & Hop ups stocked!
Lots of Yokomo BD5 , BD7 Parts & Hop ups arrived!
Yokomo BD7 Front & Rear Bulkhead A (FL or RR) #B7-302A
- For: Yokomo BD7
- Material: Aluminum
- Color: Blue
Item no.: B7-302A
Yokomo BD7 Front & Rear Bulkhead B (FR or RL) #B7-302B
- For: Yokomo BD7
- Material: Aluminum
- Color: Blue
Item no. : B7-302B
Yokomo Light Bracket For Yuke's Team Orange Beast #SD-C33L
- For: Yokomo Yuke's Team Orange Beast
- Material: Plastic
- Color: Silver
Item no.:SD-C33L
Yokomo BD7 Main Chassis (Graphite) #B7-002
- For: Yokomo BD7
- Material: Graphite
- Thickness: 2.25mm
- Color: Black
Item no.: B7-002
Yokomo BD7 Upper Deck (Graphite) #B7-003
- For: Yokomo BD7
- Material: Graphite
- Color: Black
Item no.: B7-003
Yokomo BD7 Ball End Caps 16pcs #B7-207
- For: Yokomo BD7
- Material: Plastic
- Color: Black
Item no.: B7-207
Yokomo BD7 Ball End Caps 16pcs #B7-207
- For: Yomoko BD7
- Material: Plastic
- Color: Black
Item no.: B7-207
Yokomo BD7 Aluminum Spilt Suspension Mount 41.3mm #B7-30113
Yokomo BD7 Aluminum Split Suspension Mount 42.0mm #B7-30120
Yokomo BD7 Aluminum Spilt Suspension Mount 43.5mm #B7-30135
Yokomo BD7 Aluminum Spilt Suspension Mount 44.2mm #B7-30142
This is a Yokomo Aluminum Separate Suspension Mount for BD7. It can be used for the front side rear, the type of Inner Suspension is 41.3 (B7-30113), 42mm (B7-30120) , 43.5mm (B7-30135) , 44.2mm (B7-30142).
- For: Yokomo BD7
- Material: Aluminum
- Color: Black
Item no.: B7-30113 , B7-30120 , B7-30135, B7-30142
Yokomo BD7 Shock End Caps/Shock Ends (4 pairs) #B7-S6
- For: Yokomo BD7
- Material: Resin
- Color: Black
Item no.: B7-S6
Yokomo BD5 & BD7 Gear Differential Cup #BD-501GC
- For: Yokomo BD5 & BD7
- Material: Aluminum
- Color: Dark Grey
Item no.: BD-501GC
Yokomo BD5 & BD7 Gear Differential Parts #BD-501GG
This is a replacement gasket for BD5 Series Gear Diff Unit. During the oil change etc., it is suggested to replace the gasket as well.
- For: Yokomo BD5
- Color: Brown
Item no.: BD-501GG
Yokomo BD5 & BD7 Front Graphite Suspension Arm/pr #BD-008FG
Yokomo BD5 & BD7 Front Plastic Suspension Arm/pr #BD-008F
- For: Yokomo BD5/BD7
- Color: Black
Yokomo BD5 & BD7 Rear Graphite Suspension Arm/pr/39.5mm #BD-008RG1
Yokomo BD5 & BD7 Rear Graphite Suspension Arm/pr/41.5mm #BD-008RG2
- For: Yokomo BD5/BD7
- Color: Black
Item no.: 39.5mm #BD-008RG1, 41.5mm #BD-008RG2
Yokomo BD5 & BD7 Universal Bone 45.5mm #BD-10455
- For: Yokomo BD5/BD7
- Material: Steel
- Color: Black
Item no.:44mm #BD-10440, 45.5mm #BD-10455
Yokomo BD5 & BD7 Front Steering Block #BD-415S
- For: Yokomo BD5/BD7
- Material: Plastic
- Color: Black
Item no.: BD-415S
